The zero-sequence I stage is set to the maximum zero-sequence current that should be passed by protection when a line-end grounded short circuit occurs; it does not cover the entire line length but should be no less than 15%–20% of the protected line. Pick Up Current Definition: The current level at which the relay begins to operate, overcoming the controlling force., single line-to-ground. The starting point for transformer secondary protection sizing is calculating the full load current (FLC). For a three phase transformer: FLC = kVA × 1000 / (√3 × Voltage) For a single phase transformer: FLC = kVA × 1000 / Voltage The calculated current becomes the base value for selecting breakers. Purpose: Quickly clears severe faults near the relay (e., busbar faults) with nearzero delay. Stage Ⅱ (TimeDelayed Overcurrent Protection) Purpose: Protects the remaining 20% of the line and acts as backup. The main difference is that traditional protection inputs are current and voltage signals processed in the analog domain, comparing measured analog quantities with preset thresholds inside the device.
[PDF Version]We Look Forward to Working with You